Liner Hanger Services

• The model RPSB hanger uses the unique tongue and groove slip design for superior performance.
• Unique design of the slip and hanger body reduces potential cone collapse due to liner loads.
• Protected slip while running in.
• Hydraulic set ( mechanical set also offered).
• Hanging capacities beyond standard slip and cone liner hangers.

• Run on model D setting tool (mechanical release).
• Solid body and welded body construction.
• Designed to maximize circulating area.
• 8rd and buttress threads are standards.
• l80 and p110 are standards.

• They are weight set packers (except the HLT-H.
• They can be set at any time during cementing operation by using a tamping dog assembly.
• Element is secured in the set position by an internal lock ring.
• They are built with slips for higher hanging capabilities.

• The packer is run in a second trip after the liner has been cemented and the liner setting tool retrieved.
• Bottom seal nipple stings into an existing tie back on top of a previously set liner.
• Hydraulic or mechanical set design.
• High temperature and high pressure design.
• Anti swab packer element design.
• Full bore packer.

• Consist of seal mandrel, seal units, half mule shoe, spacers as required by tie back length and a locator which lands on top of the existing equipment.
• Mule Shoe configuration aids in stabbing and provides smooth re-entry for wire line equipment.
• Seal units to meet any well environment.
• Manufactured from alloy steel to meet liners properties.
• Optional cement port available.

• Provides right hand rotation of string with tool in tension, compression or neutral position. After actuating the hydraulic piston, the tool can be retrieved by straight pull. In the event that the primary hydraulic features fails, the tool may be released by approximately 6 turns with a left hand rotation. This will preclude accidental release.

• Suspends the drill pipe weight from the top drive assembly.
• Heavy duty swivel permit manipulation of the work string without having to break down the cement line.
• Connects the cementing line to the running string during liner cementing operation and while rotating the string.
• Retains the drill pipe plug in position so the plug can be released after the cement job.
• Fluid flow through the manifold is directed either above or below the plug by external valve.
• Ball drop sub is available for use for with a hydraulic setting tool.

• Provides right hand rotation of string with tool in tension, compression or neutral position. After actuating the hydraulic piston, the tool can be retrieved by straight pull. In the event that the primary hydraulic features fails, the tool may be released by approximately 6 turns with a left hand rotation. This will preclude accidental release.

• Constructed with drill pipe retainer and swivel mechanism below the elevator.
• Heavy duty swivel permit manipulation of the work string without having to break down the cement line.
• Fluid flow through the manifold is directed either above or below the plug by external valve.
• Retains the drill pipe plug in position so the plug can be released after the cement job.
• Ball drop sub is available for use for with a hydraulic setting tool.